Typical device "Increment" settings while tuning.

LEBT Steerers -- 10V

LEBT Quadropoles -- 1V

IMS:MB1 -- 0.01A

IMS:MB2 -- 0.001A

Extraction Electrode -- 50V

Einzel Lens -- 100V

Magnetic Steerers (MEBT => ISAC-II) -- 0.1A (3A full scale), 1A (100A full scale);

Magnetic Quadropoles (MEBT => ISAC-II) -- 0.1A (60A full scale); DTL 1A then 0.1A fine tune

Magnetic Dipoles (MEBT-->ISAC-II) -- 0.05A then 0.01A for fine tune

Pre-Buncher Amplitude -- 1 unit

Pre-Buncher Phase -- 1 degree (including 'all frequencies' phase)

RFQ Amplitude -- 1 unit

RFQ Phase -- not tunable

DTL Tank/Buncher Amplitude (including rotator/rebuncher) -- 1 unit

DTL Tank/Buncher Phase (including rotator/rebuncher) -- 0.1 degree

HEBT/DSB Buncher Amplitude -- 1 unit

HEBT/DSB Buncher Phase -- 0.1 degree

SCRF Amplitude -- 1 unit

SCRF Phase -- 1 degree

DSB Bending Magnets -- see magnetic dipole

SEBTx Bending Magnets -- see magnetic dipole

Global Phase (ISAC-I & ISAC-II) -- 0.1 degree