--obsolete-- TIGRESS Scalers
TIGRESS scalers to be monitored throughout the experiment S1069.
Original: ION written by Ritu (TIGRESS)
Date: Dec. 2, 2007
1. 8PI:SCLR:VAR1
This is the TIGRESS scintillator. It should show the 11Be beam intensity.
This detector is located in the TIGRESS beam dump.
2. 8Pi:SCLR:VAR7 : Keep less than 3000 cps. Beam off if rate exceeds 5000cps.
This is the TIGRESS silicon detector count rate placed close to the TIGRESS target location. This detector should not have a high count rate. Follow the rate instructions above.
3. 8Pi:SCLR:VAR11 : Keep less than 3000 cps. Beam off if rate exceeds 5000cps.
This is the TIGRESS silicon detector count rate placed 75cm downstream of the
TIGRESS target location. This detector should not have a high count
rate. Follow the rate instructions above.